manualshive.com logo in svg

Scientek SW6000 Series, Operating And Maintenance Manual, Page: 44 / 103

Share
Download
Scientek SW6000 Series Operating And Maintenance Manual Download Page 44

Operating and Maintenance Manual 
Scientek Washer Model SW-6000 

 

Revision-3, Sept. 2007 

 

5-19

5.3.1.9 Aqua Pulsing (Spraying Patterns) 

Select a cycle for which you want to 
select a new spraying pattern, using the 
“NEXT CYCLE” button. 
 
To select a spraying pattern for the cycle 
press the button with the spraying pattern 
description inside. Press repeatedly until 
the desired spraying pattern appears on 
the button. 
 
Once you have selected the spraying 
pattern you may want to setup times for 
individual valves.  
 

se “UP” or ”DOWN” button to highlight the valve whose time on you want to change. Press 

HANGE  VALUE” button to bring up a numeric keyboard where you can enter a new 

ticular cycle press “ACCEPT” button 

 accept the changes or “CANCEL” button to cancel the changes. 

ress “EXIT” button to go back to the Set-up menu screen. 

 
 

U
“C
value. 
 
After you have changed valve-time-on values for a par
to
 
Press “RETURN” button to go back to the Cycle Time menu screen. 
 
P

 

Scientek Technology Corporation 

 

Tel:  (604) 940-8084 

7943A Progress Way, Delta, BC V4G 1A3 

 

Fax:  (604) 940-8085 

Summary of Contents for SW6000 Series








































































































Reviews:

No comments