manualshive.com logo in svg

Scientek SW6000 Series, Operating And Maintenance Manual, Page: 26 / 103

Share
Download
Scientek SW6000 Series Operating And Maintenance Manual Download Page 26

Operating and Maintenance Manual 
Scientek Washer Model SW-6000 

 

Revision-3, Sept. 2007 

 

5-2

5.1  MAIN MENU SCREEN 

 

The MAIN MENU screen displays general information about the washer including system 
date and time. 

The navigation button is provided to access the Operation Screen. 

The key-lock switch must be on to allow access to the setup and service menus. 

Alarm list can also be accessed from the Main Menu. 

 
Figure 1 – MAIN MENU Screen 

 

 

Access to Operation Screen 

 
 

 
 

or

 

Access to Set-Up Menu  (Disabled / Allowed)

 

 
 
 

or

 

Access to Service Menu (Disabled / Allowed)

 

 
 

Note that the 

  sign denotes that the key switch needs to be in the ON position in order to 

access the respective feature !! 

 

 

or

 

Access to Alarm List (no active alarms/some alarms present)

 

Scientek Technology Corporation 

 

Tel:  (604) 940-8084 

7943A Progress Way, Delta, BC V4G 1A3 

 

Fax:  (604) 940-8085 

Summary of Contents for SW6000 Series








































































































Reviews:

No comments