EASY-MAG-Series | Version 2.01
3
Introduction
1 Introduction
You have made a good choice by purchasing the weld-
ing machine made by Schweißkraft.
Thoroughly read the operating instructions before commission-
ing the machine.
It informs you about the proper commissioning, the in-
tended use as well as the safe and efficient operation
and maintenance of the welding equipment.
The operating instructions are part of the welding equip-
ment. Always keep it at the place of use of the welding
equipment. Furthermore, the local accident prevention
regulations and the general safety notes are applicable
for the field of application of the welding equipment.
The illustrations in these operating instructions serve the
general comprehension and may deviate from the actual
type.
1.1 Copyright
The contents of these instructions are copyright. Their
application is admissible in the frame of the welding
equipment utilisation. An application beyond the de-scri-
bed application is not allowed without written ap-proval
of the manufacturer.
For the protection of our products, we shall register tra-
demark, patent and design rights, as this is possible in
individual cases. We strongly oppose any infringement
of our intellectual property.
1.2 Customer service
Please contact your dealer if you have questions on the
welding equipment or if you need technical advice. They
will help you with specialist information and expert ad-
vice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair-Service:
Fax: 0049
(0)951
96555-111
Email: [email protected]
Spare part oders:
Fax: 0049
(0)951
96555-119
Email: [email protected]
We are always interested in valuable experience and
knowledge gained from using the application, which then
could be shared and be valuable to develop our products
even further.
1.3 Limitation of liability
All information and notes in these operating instructions
were summarised taking the applicable standards and
rules, the state-of-the-art and our long-term knowledge
and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use
- Use of untrained staff,
- Unauthorised modifications
- Technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the expla-
nations and presentations described here in case of spe-
cial models, when using additional ordering options or
due to latest technical modifications.
The obligations agreed in the delivery contract, the gen-
eral terms and conditions as well as the delivery condi-ti-
ons of the manufacturer and the legal regulations at the
time of the conclusion of the contract are applicable.
2 Safety
This paragraph will give you an overview of all important
safety packages for the protection of the people using it
well as for a safe and undisturbed operation. Other task-
based safety notes are included in the individual chap-
ters.
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are high-
lighted by symbols. The safety notes are introduced by
signal words which express the concern of the risk.
DANGER!
This combination of symbol and signal words indi-
cates an imminently dangerous situation which may
lead to death or severe injuries if they are not avoi-
ded.
WARNING!
This combination of symbol and signal word indi-
cates a potentially dangerous situation that can lead
to death or serious injury if not avoided.
Summary of Contents for EASY-MAG 171
Page 30: ...www schweißkraft de ...
