8
EASY-MAG-Series | Version 2.01
Technical Data
3.1 Misuse
The welder must not be used for thawing (for example
thawing of water pipes) or for heating materials that are
not intended for welding.
3.2 Residual risks
Even if all safety regulations are observed and the wel-
ding machine is used correctly, there are still residual
risks listed below:
- The welder should be set up on a horizontal surface
that can carry the weight; otherwise there is a risk of
tipping (for example, in the case of a ground slope, irre-
gular ground, etc.).
- The bottle should always be secured against overtur-
ning by suitable means.
4 Technical Data
4.1 Table
4.2 Nameplate
The most important information about the operation and
performance of the welding machine are summarized on
the nameplate:
Fig. 1: Type plate of the welding machine EASY-MAG 171
WARNING!
Risk of misuse!
Misuse of the welder can lead to dangerous situati-
ons.
- Only operate the welding machine in the power
range specified in the technical data.
- Never bypass or override the safety devices.
- Only operate the welding machine in a technically
perfect condition.
Parameter
EASY-
MAG 171
EASY-
MAG 193
EASY-
MAG 213
Connection voltage
at 50 / 60 Hz (V)
230
400
230/400
Connection cur-
rent, eff.(A)
11
2,3
8,6
Connection cur-
rent, max.(A)
24
9
20,9
Fuses (A)
16
16
16
Adjustment(A)
30 - 170
30 -190
30-140
140-200
Open circuit voltage
(V)
18 - 43
18 - 33
24 - 51
Stages
6
7
9
Welding current (A)
at 40 °C,
ED 100%
60
90
65
Power factor cos
phi
0,80
0,80
0,75
Power consump-
tion eff. (kVA)
2,5
2,0
2,6
Required generator
power (kVA)
5
4
5
ED at I max. and
40 °C
10 %
10 %
10%
Spot time
-
-
0,1-4,5s
Wire feed speed
(m/min)
1-14
1-18
1-18
Ø-Welding wire
(mm)
0,6-0,8
0,6-1,0
0,6-1,0
Torch cooling
Gas
Gas
Gas
Degree of isolation
H
H
H
Protection class
IP 21
IP 21
IP 21
Min. Sheet thick-
ness
0,7
0,7
0,7
unalloyed. stole
(mm)
stainless steel
(mm)
1
1
1
Dimension
(LxWxH) [mm]
810 x
406 x
685
810 x
406 x
685
810 x
406 x
685
Weight
36 kg
39 kg
41 kg
Parameter
EASY-
MAG 171
EASY-
MAG 193
EASY-
MAG 213
Summary of Contents for EASY-MAG 171
Page 30: ...www schweißkraft de ...
