SCHUNK SWS 005 Assembly And Operating Manual Download

Page: 78 / 137

Assembly

12.00 | SWS | Assembly and Operating Manual | en | 389456

5.4.3.2 SWS 041 / 060 / 071

Prepare sensor installation

Place the SWA in the storage rack, secure and uncouple it.

Switch off the power supply and ensure that there is no residual
energy in the system.

Remove the compressed air hose.

Disassemble the SWK from the robot and safely set the SWK
aside,

Removing the product from the robot arm

[

}

90].

Remove cover plate

Loosen screws (2) and carefully remove the cover plate (1) from
the SWK (4). Make sure that the O-ring (3) remains in the
SWK (4).

Prepare sensor assembly

Check the O-ring (2) in the sensor assembly (1) and lubricate if
necessary,

Lubricants/greasing areas

[

}

89].

Summary of Contents for SWS 005










































































































































Search results

Summary of Contents for SWS 005

Reviews:

Related manuals for SWS 005

Brands by name

Popular brands

SCHUNK SWS 005, Assembly And Operating Manual

Search results

Summary of Contents for SWS 005

Reviews:

Related manuals for SWS 005

Brands by name

Popular brands