SCHUNK SWS 005 Assembly And Operating Manual Download Page 107

Page: 107 / 137

Maintenance

12.00 | SWS | Assembly and Operating Manual | en | 389456

107

SWS 020HM / 021HM

SWS 020HM / 021HM: Change integrated piston stroke control

Remove defective sensor assembly

Place the SWA in the storage rack, secure and uncouple it.

Disassemble the SWK from the robot and safely set the SWK
aside,

Removing the product from the robot arm

[

}

90].

Lock and unlock the locking piston and check the signals of the
sensors.

Check sensor cable for damage, replace if necessary.

Switch off the power supply and ensure that there is no residual
energy in the system.

Loosen screws (4) and remove adapter plate (1) from SWK (3).

IMPORTANT! Damage to the sensor cable possible! When
removing the adapter plate, make sure that the sensor cable
has sufficient play.

Remove sensor cable and compressed air lines.

Loosen hexagon nut (6) and remove damaged sensor (2) or (5).

Summary of Contents for SWS 005










































































































































Search results

Summary of Contents for SWS 005

Reviews:

Related manuals for SWS 005

Brands by name

Popular brands

SCHUNK SWS 005, Assembly And Operating Manual

Search results

Summary of Contents for SWS 005

Reviews:

Related manuals for SWS 005

Brands by name

Popular brands