SCHUNK SWS 005, Assembly And Operating Manual

Page: 79 / 137

Assembly
12.00 | SWS | Assembly and Operating Manual | en | 389456
79
Mount sensor assembly on SWK
Mount sensor assembly on SWK
Ø
Protect the threads of the detection shaft (6) from lubricant
with a strip of adhesive tape.
Ø
Lubricate the detection shaft (5),
Lubricants/greasing areas [
}
89].
Ø
Carefully push the detection shaft (5) into the sensor
assembly (1) up to the stop.
Ø
Remove adhesive tape from the thread of the detection
shaft (6).
Ø
Apply primer for the screw lock on the thread (6) of the
detection shaft and briefly allow it to dry.
Ø
Apply screw lock to thread (6).
Ø
Align the sensor assembly (1) with the dowel pin (2) on the
SWK (3).
Ø
Secure sensor assembly (1) to SWK (3) with screws (4).
✓
Max. tightening torque: 0.68 Nm