Maintenance
12.00 | SWS | Assembly and Operating Manual | en | 389456
111
SWS 041 / 060 / 071
Change external piston stroke control, A = View from above, shown as an example on
SWK 041
Remove defective sensor assembly
Ø
Place the SWA in the storage rack, secure and uncouple it.
Ø
Loosen screws (4) and remove SWK (3) from the adapter plate
for sensor assembly (1).
Ø
Check sensor cable for damage, replace if necessary.
Ø
Lock and unlock the locking piston and check the signals of the
sensors.
Ø
Switch off the power supply and ensure that there is no residual
energy in the system.
Ø
Remove the compressed air hose.
Ø
Remove sensor cable (5).
Ø
Loosen the hexagon nut (7) and unscrew the sensor (6) from the
sensor assembly (2).
Ø
Remove washer (8) from sensor (6).
