SCHUNK PWG-plus 100, Assembly And Operating Manual

Page: 42 / 52

Maintenance
42
09.00 | PWG-plus | Assembly and operating manual | en | 389495
PWG-plus 125-240
Dimensions of assembly device in chapter Assembly device
cylinder piston with gripping force maintenance [
}
44]
Ø
Mount the base jaws (2) and piston (3) with the seal (31) in the
housing.
Ø
Insert the compression spring (25), spacer bolt (11) and cylinder
piston (9) with seals (30) and (33) into the housing (1).
Ø
Carefully pull part 1 (103) over the cylinder piston (9) and
mount onto the housing (1) with the screws (104).
Ø
Position part 2 (105) and evenly screw onto the device part
1 (103) using the screws (106).
Ø
Insert the screw (45) into the cylinder piston (9) and tighten.
✓
Observe the maximum tightening torque,
Tightening torque for screws [
}
43].
Ø
Remove devices (103) and (105).
Ø
Reassemble the product. Assembly is done in the reverse order
of disassembly,
Drawings [
}
46].