Assembly
01.00|HGN |en
19
NOTE
• The proximity switches are an accessory and must be ordered
separately.
• The control cams for gripper “Open” and “Closed” are already
assembled.
• The control cams for intermediate positions are enclosed in the
accessories pack.
NOTE
The max. tightening torque for the fastening screws of the proxim-
ity switch is 1 Nm.
Gripper open:
1 Set the gripper to the "Open" position.
2 Carefully move the opener into the clamping sleeve until the
proximity switch contacts the control cam.
3 Draw back the proximity switch by appr. 0.5 mm.
4 Fasten the proximity switch with the lateral set-screw. (ob-
serve max. tightening torque).
5 Connect the proximity switch.
6 Check proper function by closing and opening the gripper.
Gripper closed:
1 Set the gripper to the "Closed" position.
2 Carefully move the opener into the clamping sleeve until the
proximity switch contacts the control cam.
3 Draw back the proximity switch by appr. 0.5 mm.
4 Fasten the proximity switch with the lateral set-screw. (ob-
serve max. tightening torque).
5 Connect the proximity switch.
6 Check proper function by closing and opening the gripper.
Summary of Contents for HGN 100
Page 34: ...34 01 00 HGN en ...
Page 35: ...Notes 01 00 HGN en 35 Notes ...
Page 36: ...Notes 36 01 00 HGN en Notes ...
