Schrack Seconet Integral MAP, User Manual

Page: 19 / 28

General operations | Alarms, faults and additional lists
B-HB-0133EN Operating panel Integral MAP | User manual
19
5 General operations
NOTE
Duty to keep log book
Please note the country-specific operator obligations on the duty to keep a
log book. Where required, all implemented operating processes must be re-
corded in the log book after completion.
5.1 Alarms, faults and additional lists
| Alarms, faults and additional lists
Alarms Faults Disablements Actuations Other Lists
FAULTS 09:58
OUTPUT 110 0001
INPUT 22 0002
OUTPUT 22 0003
ZONE 1/6 0007
0000 0007 0000 0000 0000
Pressing the buttons
S
–
V
shows the lists of elements on the display with alarm or
fault messages, the disabled elements or elements with actuations. Pressing the button
W
shows additional lists (activations, time levels, presignals or fault acknowledgements).
The elements are indicated with the logical element number and where applicable with
the sub-element number (detector number). The elements in the list are consecutively
numbered.
Three list entries are shown under the title of the list; in line four of the list, the last list
entry is always displayed. Using the scroll buttons
E / F to navigate through the list
entries. Focus is on the topmost list entry.
Pressing the button Site Info
J
displays site information.
Site information can be called up for each element when in list view or element view. A
customer-specific programmed text is displayed, e.g.
1ST FLOOR , CONFERENCE ROOM ,
ROOM 25 .
Pressing the button Additional Information
Y
displays additional information.
In list view or element view, additional information can be called up for each element,
e.g. detector zone, detector number, date and time or in case of an event, e.g. alarm,
fault, disablement or actuation.