Schrack Seconet Integral MAP, User Manual

Page: 7 / 28

Overview
B-HB-0133EN Operating panel Integral MAP | User manual
7
3 Overview
The Integral MAP indication and operating panel is used for operating and indication of
the Schrack Seconet Integral fire alarm control panels.
From this panel, it is possible to send commands to the system, as well as to display the
system status of all devices. The operating panel is either built into the fire alarm control
panel’s door, or housed in a separate case.
The descriptions of the buttons and functions are broken down into five categories.
FIRE
Delay
Intervention
Buzzer silenced
Reset Alarm/
System
Actuated
Fault
Disable/Enable
Call Fire Brigade
Site Info
Access Code
Zone
Output
Input
Other Elements
Additional
Information
Menu
On
Off
Set Reset
Other
Commands
1 2 3
4 5 6
7 8 9
0
Alarms Faults Disablements Actuations Other Lists
Schrack Seconet
0000 0000 0000 0000 0000
29.01.2020
INTEGRAL
Operation
Faults
System
Power
Disablements
Test Mode
Fire protection
equipment
Call Service
Actuated
Fault
Silence/
Resound
Disable/Enable
1 2 3
4 5
A
Buttons and LED in the event of an alarm ( Chapter Buttons and LED in the event
of an alarm , Page 8 )
B
Display and buttons for operation ( Chapter Display and buttons in operation re-
gion , Page 10 )
C
Operational status and fault indication ( Chapter Operational status and fault in-
dication , Page 13 )
D
Buttons and LED for transmission equipment (main detectors) ( Chapter Buttons
and LED for transmission equipment (main detectors) , Page 14 )
E Buttons and LED for alarm systems (sirens) ( Chapter Buttons and LED for alarm
systems (sirens) , Page 15 )