General operations | Operate elements
B-HB-0133EN
Operating panel Integral MAP | User manual
23
3.
Confirm with the enter button
D
.
Pressing the button
Access Code
K
again you can select whether you want to switch
back to authorisation level 1 or switch to another level. Once the programmed time has
elapsed the system will revert automatically to the authorisation level 1.
5.5
Operate elements
| Operate elements
(An authorisation code must be entered for this to be permitted)
1.
Pressing on of the buttons
N
–
Q
selects a list with the individual elements types
(depending on programming and authorisation level).
2.
Enter the number of the element to be selected using the numerical buttons of the
keypad
X
.
NOTE
If an individual detector of a detector zone is to be queried, enter the de-
tector number in addition to the detector zone number, separated by a slash
(
/
).
3.
Confirm with the enter button
D
. If an element has been selected, then the ele-
ment’s current status is shown on the display.
u
Pressing the button
Off
e
turns the element off.
u
Pressing the button
On
d
turns the element on.
u
Pressing the button
Set Reset
f
either sets or resets a function, depending on the
current state.
u
Pressing the button
Other Commands
g
displays the list of all available com-
mands. Using the scroll buttons
E
/
F
to scroll through all the entries in the list. Con-
firm with the enter button
D
.
NOTE
Using other commands it is possible to disable detectors with time limits.
Summary of Contents for Integral MAP
Page 1: ...Operating panel Integral MAP User manual FIRE ALARM EN ...
Page 2: ......
