General operations | Fault messages
20
Operating panel Integral MAP | User manual
B-HB-0133EN
5.1.1
Filter list view by element types
If a list contains many entries with several element types, you can filter the list and re-
duce the display of entries to a selected element type. The element type is selected be-
fore the list is called up.
1.
Pressing on of the buttons
N
–
Q
selects a list with the individual elements types
(depending on programming and authorisation level).
u
Detector zones by pressing the
Zone
N
button.
u
Outputs by pressing the
Output
O
button.
u
Additional external signalling systems by pressing the
Input
P
button.
u
All other types of element, which could not be selected by using one of the other
buttons listed above (e.g. Printer, Battery etc.) by pressing the
Other Elements
Q
button.
2.
Press the buttons
S
–
V
to call up the respective list. The list entries are filtered ac-
cording to the selected element type.
5.1.2
Warnings list
Elements of the fire alarm system, which are to be replaced, trigger a service all message
(the service call LED
o
lights up). Call service department/customer service immediately.
The warnings list shows all elements, that have triggered this message.
1.
Pressing the button
W
displays additional lists.
2.
Using the scroll buttons
E
/
F
to select the entry
WARNINGS
.
3.
Confirm with the enter button
D
.
5.2
Fault messages
| Fault messages
The
i
LED flashes and the fault’s signal is sounding, if there are faults (
Faults
T
displays the malfunctioning com-
ponent with element type, element number and where applicable detector zone.
Pressing the button
Site Info
J
displays site information. Pressing the button
Additional Information
Y
displays additional information.
There may be an device or system fault or the emergency mode has been activated.
5.2.1
Device fault
Fault in a device connected to the fire alarm control panel (e.g. detector zone, input, out-
put). If the reason for failure is known (e.g. power failure, reconstruction work), disable
the faulty device if necessary. Call the service department/customer service (necessary in-
formation: equipment type and number, customer number, messages, error codes).
Summary of Contents for Integral MAP
Page 1: ...Operating panel Integral MAP User manual FIRE ALARM EN ...
Page 2: ......
