Schneeberger MONORAIL, Assembly Instructions Manual, Page: 8 / 24

8
5.4 Determining installation variants
Different installation variants are recommended, depending on the requirements
for the accuracy and the rigidity of the rails. These differ by way of customer-
specific locating sides and therefore by way of the lateral guide.
Four typical installation variants are described in more detail below:
Reference rail
•
On the side of the reference rail
locating sides between machine
bed and rails, mounting plate and
carriage
•
Mounting plate screwed onto the
carriage from above
Reference rail
•
On both rail sides locating sides
between the machine bed and rail
•
On the reference rail side locating
sides between the mounting plate
and carriage
•
Mounting plate screwed onto the
carriage from above
Reference rail
•
On the side of the reference rail
locating side between machine bed
and rail
•
On both rail sides locating sides
between the mounting plate and
carriage
•
Mounting plate screwed onto the
carriage from above
Reference rail
•
On the reference rail side locating
side between the machine bed and
rail
•
On both rail sides locating sides
between the mounting plate and
carriage
•
Mounting plate screwed onto the
carriage from below
The rail which is placed on a locating side of the machine bed is designated the
reference rail (rail 1) .
Installation variant 1
Installation variant 2
Installation variant 3
Installation variant 4