11
7.
Slide the mounting plate with the carriage backwards and forwards and
tighten the fastening screws of the unsecured rail securely next to the
carriage, see section 6.1.
8.
Securely screw on the mounting plate.
6.3
Installation variant 2
1.
Clamp both rails against the locating sides and securely screw them into
place, see section 6.1.
2.
If necessary, fit clamping screws, clamping bars or conical bars.
3.
Place the mounting plate on the carriages and gently tighten all fastening
screws.
4.
Clamp the mounting plate against the locating sides of the carriage on the
reference rail and securely screw it to these two carriages.
1
Reference rail
2
Opposite rail
5.
If carriages with additional wipers are protected by a mounting rail film, secure
the mounting rail film to prevent it slipping, see section 7.2.
6.
Slide the mounting plate with carriage once over the entire rail length.
7.
Securely screw the mounting plate into place.