10
•
The carriages and rails form a unit. The carriages of different rails are
not
interchangeable with each other.
•
If possible, always leave the carriages on the rail.
To run a carriage on and off
for MONORAIL MR, use a mounting rail, see section 8.2. Always leave run-off
carriages on the mounting rail.
•
Always clamp the locating sides of the carriages against the locating sides of
the mounting plate. The locating side of a carriage is a ground side.
•
Have the lubricant connection change on the front plate of the carriage carried
out only by SCHNEEBERGER.
6.2
Installation variant 1
1.
Clamp the reference rail against the locating side of the machine bed and
screw it securely into place, see section 6.1.
1
Reference rail
2
Opposite rail
2.
Align the opposite rail parallel and provisionally secure it.
3.
Place the mounting plate on the carriages and gently tighten the fastening
screws.
4.
Clamp the mounting plate against the locating sides of the carriages on the
secured reference rail and screw securely into place.
5.
Securely screw a carriage on the not yet fastened rail on the mounting plate.
6.
If carriages with additional wipers are protected by a mounting rail film, secure
the mounting rail film to prevent it slipping, see section 7.2.
Handling carriages