7
5.3
Preparing the locating sides
1.
Check the locating sides of the machine bed and mounting plate for
dimensional and position accuracy. If these do not meet the requirements,
have the locating sides reworked.
1
Locating side, mounting plate
2
Locating side, carriage
3
Locating side, machine bed
4
Locating side, rail
2.
Clean all locating sides thoroughly. Remove burrs and unevenness with an
oilstone.
3.
Remove the corrosion protection from the rails and carriages using naphtha or
mineral spirits. Do
not
use nitro!
4.
Lightly oil the locating sides on the rails band carriages.