14
7
Completing assembly
7.1
Fitting the screw cover
In the case of
MONORAIL BM
, the fastening screws on the rails can
only
be
covered with plastic plugs or cover strips.
Plastic or brass plug
Ä
Place the plugs onto the retaining holes of the rails and knock them in
straight. To do this, use a plastic hammer or an intermediate piece.
Steel plug MRZ
Steel plugs are supplied pre-pressed. The hydraulic mounting tool MWH must be
used for assembly.
1.
Run the mounting tool onto the rail with the mounting rail MRM.
1
Hydraulic mounting tool MWH
2
Steel plug
3
Sleeve
2.
Place the steel plug onto the head of the fastening screw in the rail.
3.
Position the mounting tool exactly above the steel plug using the two
semicircular bore holes.
4.
Press in the steel plug.