Schmidt HTG Series Operating Instructions Manual Download Page 7

Page: 7 / 56

2. Names and Functions

An amplifier unit

Functions

ON/OFF button

Turn ON/OFF the power. Select menu.

ZERO button

Zero values. Select menu.

PEAK button

Toggle between “Peak mode” and “Track mode”. Select menu.

SEND button

Save data. Send data to a printer and a computer. Select menu.

MENU button

Go to Set up mode and measurement mode. Enter settings.

Display

Show values, settings and the status.

Comparator

Judgment LED

Judge force values according to set comparator values.

Connector

Connector for sensor

AC adaptor

connector

Recharge battery with AC adaptor.

USB connector

For data sending to PC with USB cable (included).

HTGA only: Save data on USB memory (excluded).

I/O connector

Connector for other equipments, i.e. PC, printer, and displacement

scale.

Battery cover

Rechargeable battery inside. The battery can be replaced. (*)

*Refer to the page 37.

* The design of operation panel is different between HTGS and

HTGA.

Summary of Contents for HTG Series

























































Search results

Summary of Contents for HTG Series

Reviews:

Related manuals for HTG Series

Brands by name

Popular brands

Schmidt HTG Series, Operating Instructions Manual

Search results

Summary of Contents for HTG Series

Reviews:

Related manuals for HTG Series

Brands by name

Popular brands