7
2.Names and Functions
Display
①
②
③
①
②
⑥⑦③
④
⑥
⑦
⑤
④
⑤
①
Battery
/ Battery status
②
Displacement value zero
/ Valid or invalid: Zero displacement value at arbitrary force value.
(Refer to page 20, [8.Function Setting, Displacement reset]) (*)
③
Auto Zero Timer
/ Valid or invalid: Zero force value after arbitrary time.
(Refer to page 20, [8.Function Setting, Auto Zero Timer])
④
Peak mode
/ Valid or invalid (Refer to page 20, [8.Function Setting, Auto Zero Timer])
(Refer to page 20, [8.Function Setting, Peak Functions])
⑤
Unit /
Measurement units
⑥
Data hold
/ Valid or invalid: Holding measuring values.
([Hold] is displayed instead of [mem] on Multi display, while holding values.)
⑦
USB memory
/ On: Connected, Flashing: Sending data.
([mem] is displayed on Simple display, while USB memory is connected.)
⑧
Header
/ (Refer to page 14, [6.Single display / Multi display])
⑨
Middle display
⑩
Footer
/ (Refer to page 14, [6.Single display / Multi display])
* Only for HTGA
Screen Saver function
This force gauge equips with a screen saver function.
It shows a moving image (right) on its screen when the force gauge
is on but is not being used for a certain time for the protection of the
screen.
Press Menu button to close the screen saver display.
To set up the time to activate this function, go to [Function Setting] - [Display Functions] - [Screen
Saver].
* When it is set OFF, the screen saver function does NOT work.
Note that no button works except Menu button while the screen saver is on.
It continues to send signals or transfer data to PC for graphing even when the screen saver is on.
Single Display
Multi Display
⑧
⑨
⑩
