29
11. 1st / 2nd Peak Value (HTGA only)
The peaks of the first and the second curves, instead of the peak of whole measurement, can be
detected.
The 1st peak as [P1] and the 2nd peak as [P2] are displayed on the footer on Multi display.
The 1st and the 2nd peak drops
(decreasing value) can be set on “1st / 2nd Peak Drop” of “Peak
Functions” in Program Menu. Refer to page 2
2. After force value increases, the peak of curve is
detected as the 1st (2nd) peak when the force value decreases by more than the set peak drops. (See
above picture)
*The set peak drop should be absolute value.
The 1st and the 2nd peaks can be detected on one direction (clockwise or counter clockwise).
The direction of the 2nd peak follows one of the 1st peak.
Torque
Time
The peak of curve is detected when torque value
decreases by more than the set peak drops (A).