Schmidt HTG Series, Operating Instructions Manual

Page: 22 / 56

21
8. Function Setting
Function Setting(Program Menu)
Main menu Sub menu Setting
menu
Description Valid
model
Initial
setting
High / Low Set
points
High
+/- [0000 to
9999]
Set Hi and Low values. LED and
output signal show whether the
measurement value is below, within,
or above the set values.
-NG: Displayed value < Low set point
OK: Low set point
≦
Displayed
value
≦
Hi set point
+NG: Displayed value > Hi set point
HTGA /
HTGS
+Capacity
Low
+/- [0000 to
9999]
-Capacity
High / Low
Output
Value No.1
+/- [0000 to
9999]
Set sub comparator value to judge
whether displayed value reaches the
set value. The result is output to
external equipment.
OFF: Displayed value < No.1 or No.2
set point.
ON: No.1 or No.2 set point
≦
Displayed value
This function is only for output.
HTGA
0000
Value No.2
+/- [0000 to
9999]
0000