Schischek GmbH Germany, Mühlsteig 45, Gewerbegebiet Süd 5, 90579 Langenzenn, Tel. +49 (0)9101 9081-0, Fax +49 (0)9101 9081-77, E-Mail [email protected]
www.schischek.com
E X P L O S I O N P R O O F
Torque motor
8 Nm
15 Nm
Torque spring return (F)
min. 8 Nm
min. 15 Nm
Dimension of external torque
minimum 2 Nm lower load reduce lifetime
minimum 5 Nm lower load reduce lifetime
Supply voltage/Frequency
24...240 VAC/DC, ± 10% , self adaptable, Frequency 50...60 Hz ± 20 %
Dimension
max. starting currents see table "EL-S" (in acc. with voltage, I
start
>> I
rated
), max. 20 W blocking position, approx. 16 W for heater
Protection class
class I (grounded)
Angle of rotation and indication
95°, incl. ~ 5° pre-tention, mechanical value indication
Working direction
selectable by left/right mounting to the damper/valve shaft
Motor running time
3 / 15 / 30 / 60 / 120 sec. at 90° selectable on site
Motor running time 3 Sec.
due to external torque and supply voltage 3 to 4 Sec at 90° ancle
Motor
brushless DC Motor
Spring return (F)
spring return in the event of loss of power
Spring return running time (F)
spring return in < 1 sec. at 90°
Safety operations
min. 1.000 in acc. with construction of damper and ambient, consider minimum load
Response time spring return
up to 1 sec. after power failure
Control mode
On-off
Thermal circuit
Additional circuit to connect a passive potential free thermostat as a safety sensor, e.g. type InPro-TT-.. in version ..-BF1
InPro-TT-.. connection
direct to the actuator with M12 × 1,5 mm fast connection
Integrated aux. switches
2 aux. switches, switching at 5° and 85° Angle of rotation in types ..-SF1 and ..-BF1
Axle of the actuator
double squared 12 × 12 mm, direct coupling, 100 % overload protected
Electrical connection
cable, ~1 m, diameter of wires 0,5 mm²
Diameter of cable
~ Ø 7,3…9,6 mm acc. to type
Cable gland
M16 × 1,5 mm standard
Manual override
manual override only if supply voltage is cut, use delivered socket wrench, slow motion, enough torque/force is required
Attention: with manual operation of actuators with spring return danger of injury exists, with release/let go the allen key.
Integral heater
integral heater, controlled, for ambient temperature down to -40°C
Housing material
aluminium die cast housing, painted (optional in stainless steel version AISI 316 Type InMax-...-VAS, amercoat painting type InMax ...-CTS)
Dimensions
L × W × H = 210 × 95 × 80 mm, for diagramm see extra information “ME-S”
Weight
~ 3,5 kg Aluminium housing (stainless steel ~ 7 kg)
Ambients
storage temp. -40…+70°C, working temperature -40…+50°C, humidity in acc. with EN 60335-1
Operation mode at
runningtime motor 3 sec
the motor will work in 3 seconds only after 1 minute voltage supply. While open/close-operation (open voltage supply and shut it down)
the motor works only with speed 15 sec./90°
Operation mode at
runningtime motor 15 sec
at 15/30/60/120 sec. 100 % ED
Self adjustment
if you select 3 sec. and 15 sec. mode for motor you need to start the self adjustment mode
Maintenance
maintenance free, maintenance must be complied with regional standards, rules and regulations
Wiring diagrams (SB)
SB 1.4 / 1.5 / 7.5 / 7.6
SB 1.4 / 1.5 / 7.5 / 7.6
Delivery
1 actuator, 1 m cable, double squared shaft connection 12 × 12 mm, 4 screws M4 × 100, 4 nuts M4, socket wrench for simple manual override
Parameter at delivery
8 Nm, 30 sec./90°
15 Nm, 30 sec./90°
EMV
Directive 2004/108/EC
Low voltage
Directive 2006/95/EC
IP-Protection
IP66, in acc. with EN 60529
Potential compensation
external PA-terminal, 4 mm²
Certification
InMax actuators size S
...-VAS
above listed types in stainless steel housing AISI 316, parts nickel-plated
...-CTS
above listed types in Al-housing with amercoat painting, parts nickel-plated
InBox-...
Terminal boxes
InSwitch
2 external aux. switches, adjustable
MKK-S
mounting bracket for terminal boxes type InBox-... direct on actuator
HV-S
comfortable manual override for InMax actuators size S
Adaptations various adaptations for dampers/valves on request
BFH-S
mounting holder for actuators at fire danger area
InPro-TT-..
passive temperature sensor
AR-12-xx
reduction of square damper connection from 12 mm to 11, 10, ...
InMax-..-.F1
Technical data
InMax-8-.F1
InMax-15-.F1
Accessories or special solutions size S
