www.schischek.com
Specification
InMax actuators of the size S are equiped with a 12 × 12 mm (double square) form-fitting shaft connection. For mounting to butterfly valves or ball valve a special mounting bracket
in acc. with DIN EN ISIO 5211 is required. Since this standard provides only certain basic conditions there can be substantial geometrical differences between armatures which require
a special adaption.
Specification
E X P L O S I O N P R O O F
Schischek GmbH
Germany, Mühlsteig 45, Gewerbegebiet Süd 5, 90579 Langenzenn, Tel. +49 (0)9101 9081-0, Fax +49 (0)9101 9081-77, E-Mail [email protected]
InMax-.. extra information ME size S
4 ×
4 ×
Mounting to a butterfly valve
Mounting to a ball valve
4 ×
Mounting instructions for InMax actuators size S on butterfly valve and ball valve
Mounting of InSwitch accessory to the actuator
1. Put the squared connection part to the actuator, then mount InSwitch and fix it with 4
screws
2. InMax with mounted InSwitch
