Schiller AT-101, Service Handbook

Page: 34 / 66

4 System Settings
4.5 Software
A"#$0$
Page 32
A
rt
.-
no
.:
2
.5
4
0
0
37
R
ev
.:
a
4.5.4 Default Settings
Unit Defaults Table
To reset the unit to the base default settings, press the BASE INIT softkey. As the unit
resets to the default values a message is briefly displayed on the LCD. The base set-
tings (Defaults) are given on the following page.
PRINT
SETUP
EXIT
COMM
TEST
BASE
INIT.
SOFTWARE
Settings Standard With Interpretation
Language As set As set
Auto Format 1
ECG: 25mm/s, short (o) ECG: 25mm/s, short (o)
Internal
Rhythm Leads V1 Rhythm Leads V1, II
MECG: 2x6 (50mm/s + 1)
Measurements: Suppressed (-)
Marks: Enabled (+)
Interpretation: Enabled (+)
Auto Format 2 ECG: 25mm/s, Long (ooo) ECG: 25mm/s, long (ooo)
external Rhythm Leads V1 Rhythm Leads V1, II
MECG: none
Measurements: Suppressed (-)
Marks: Enabled (+)
Interpretation: Enabled (+)
Filter
Baseline 0.05Hz Baseline 0.05Hz
Mains Filter 50Hz (60Hz) Mains Filter 50Hz (60H
Myogram off at power up Myogram off at power up
Myogram 35Hz, OFF Myogram 35Hz, OFF
SBS OFF (-) SBS OFF (-)
SSF OFF (-) SSF OFF (-)
Interpretation
Settings
Sensitivity low (-)
Age: <= 30 (-)
Abnormal ECG Not Print
Unconf. Report Print (+)
Thrombolysis OFF (-)
Leads Sequence Standard (S) Sequence Standard (S)
Signals Sequential Signals Sequential
Autom. Centering ON (+) Autom. Centering ON (+)
Rhythm On (+) Rhythm On (+)
V4-9 On (+) V4-9 On (+)
V5r Off (-) V5r Off (-)
V6r Off (-) V6r Off (-)
Nehb DAJ Off (-) Nehb DAJ Off (-)
General Storage mode manual Storage mode manual
Memory and
Communication
Baud rate 57600 bps Baud rate 57600 bps
Trans. mode: line Trans. mode: line