Page 45
Care & Maintenance
5
A"#$0$
Service Handbook
Changing the fuse and mains voltage
5.5
A
rt
.-
no
.:
2
.5
4
0
0
37
R
ev
.:
a
5.5 Changing the fuse and mains voltage
Table fuse types
!
The mains voltage may only be changed by qualified personnel.
!
Before the fuse and mains voltage are changed, the device must be disconnected
from the mains and remove the mains plug. See paragraph
!
The fuse may only be replaced by the indicated fuse type of the table below.
Voltage range
Numbers
Fuse type
220 - 240 VAC
2
250 V / 200 mA (T = slow blow)
100 - 115 VAC
2
115 V / 315 mA (T = slow blow)
Changing the fuse
1. Disconnect the device from the mains and remove the mains plug. See paragraph
2. Loosen the fuse inset using a screwdriver and remove it.
3. Replace existing fuses with the same type. See table above
.
4. Re-insert the fuse inset.
Changing the mains voltage
1. Disconnect the device from the mains and remove the mains plug.
2. Loosen the fuse using a screwdriver and remove it.
3. Remove the grey inset, turn it by 180° and re-insert it.
4. Check the voltage indication in the window.
5. Replace both fuses. See table above
.
6. Re-insert the fuse assembly.
Fig. 5.8
Fuse inset
Summary of Contents for AT-101
