Service Mode and Demo Mode
ARGUS VCM
Total System Runtime
Total Runtime displays the number of hours, rounded to the nearest hour, that the
monitor has been operational.
Note: The values of Total Runtime may not be reset, but it will be reset to zero when a
new Main PCB assembly is installed.
Figure 8. Total Runtime
Factory Default Reset
To reset the monitor operating parameters to the factory default settings, press the
Mode button until “ DEFAULT RESET=NO” is displayed.
To reset to the factory default values, select ‘YES’ using only Up (+) selection button.
The monitor immediately resets to the defaults and the confirmation tone sounds.
To leave the settings unchanged, select ‘NO’ using only Down (-) selection button.
Figure 9. Factory Defaults Reset
ARGUS VCM
Service Manual 27
