5
– FUNCTIONING AND USE
COD.
60M12/24.D.2018
EN
THE PRESENT MANUAL BELONGS TO -
Schenker Italia
- ALL RIGHTS RESERVED
32
5. FUNCTIONING AND USE
5.1 Command description
Remote control panel
Fig. 5.1
KEYBOARD FEATURES
The panel keyboard has 4 push buttons. The display light switches off after 15 minutes of not use. Pushing
any button, the display will light again, without activate any other command. The functions of the push
buttons are:
START
Used to start the system.
If it is pushed shortly the system starts and the unit will run indefinitely until will be pushed STOP.
If it is pushed for at least 3 seconds the system starts, and will stop automatically after the working hours
selected with the timer (see menu functions).
It can anyway be stopped before, pushing STOP.
It is used as well to scroll the different options in the single menu.
STOP
Used to stop the system.
The system, once pushed STOP, usually doesn’t stop suddenly. It awaits the correct positioning of the internal
valve (2-3 seconds), and then stops automatically.
If the automatic washing is activated (washing light on), the system, once pushed STOP, will perform the
automatic washing (1 min) before stops.
The push button STOP is used as well to exit from the menu function.
WASHING
Used to rinse the system automatically with fresh water.
If it is pushed shortly the system will get ready to perform an automatic washing (1 minute long) once the
system will be stopped.
If it is pushed for at least 3 seconds the system will just perform a 10 minutes rinsing, without suck up sea
water.
MENU
Used to enter into the MENU mode and modify some parameters.
Pushing it repeatedly the different MENU options can be scrolled.
On his turn the START push button allows to scroll the different options of the single menu.
The system recognizes the current value without any further command.
The STOP push button allows to exit from the MENU function.
