5
– FUNCTIONING AND USE
COD.
60M12/24.D.2018
EN
THE PRESENT MANUAL BELONGS TO -
Schenker Italia
- ALL RIGHTS RESERVED
38
5.4 Normal operating procedure
Please, be sure to perform all the following checks before proceeding normal operating procedure:
1. Be sure the reset valve is closed (lever
orthogonal
to the body valve) and the positioner completely
unscrewed.
2. Be sure the depressurization valve is closed.
5.4.1
Normal operating procedure with final flushing (recommended)
1. Push shortly the button START.
The controller will open the electrovalve, helping the
inlet pump hose to get filled with water. After 5
seconds the controller starts the pump.
The display will show the increasing production time.
2.
Select WASHING
, pushing shortly the
related push button.
3. Push the Stop button to stop the unit after the
working cycle.
The system will start the washing procedure, and then
will stop automatically after around 1 minute.
The fresh water consumed for the automatic washing
is about 12 lt.
5.4.2
Normal operating procedure with timer and final flushing
1. Select the needed timing (1 to 6 hours)
through the specific timer within the menu
option (the system will hold as well the
previous setting.)
2. Push the button START for more than 3
seconds.
3. Select the WASHING option pushing shortly
the push button.
The display will show the decreasing production time.
The system will stop when the selected time is
reached, and then will perform the automatic
washing.
However, the system can be stopped at any time by
pushing STOP.
