3
– PRODUCT PRESENTATION
COD.
60M12/24.D.2018
EN
THE PRESENT MANUAL BELONGS TO -
Schenker Italia
- ALL RIGHTS RESERVED
12
Weight:
28 Kg
Hydraulic Connection
Seawater inlet:
¾’’ fitting, 16mm internal diameter reinforced hose.
Exhaust:
½’’ fitting, 16mm internal diameter reinforced hose.
Fresh water:
¼’’ fitting, 6x8mm hose.
PUMP GROUP
Dimensions
Length:
34 cm
Width:
19 cm
Height:
35 cm
Weight:
10 Kg
Hydraulic Connection
Water inlet:
¾’’ fitting, 16mm internal diameter reinforced hose.
Water outlet:
¾’’ fitting, 16mm internal diameter reinforced hose.
Feed pump type:
Shurflo diaphragm pump
Filters:
n. 1 Cartridge
filter 5 microns 2.32" x 9 ¾’’
n. 1 Active carbon filter
2.32" x 9 ¾’’
Power supply:
12 VDC +/- 15% (60M12 version)
.
24 VDC +/- 15% (60M24 version)
Average electric consumption
: 250 Watt/h average
Peak electric consumption
:
500 Watt
Nominal fresh water production:
60 Lit/h +/- 20% @ seawater 25 °C salinity 35.000 ppm
Fresh water quality:
Under 500 ppm TDS average
CEE conformity
:
In compliance with directives 89/392 CEE sect.1 (general safety machines
requirements), 89/336 CEE (electromagnetic compatibility), 73/23 CEE
(electric safety requirements)
3.6 Features of the product
The water produced by a Schenker plant, produced from clean seawater has a purity of between 350 & 450
parts per million Totally dissolved solids (TDS/PPM), but the potability may not be guaranteed as bacterium
may be present in the watermaker, caused by non-observance of shutdown and cleaning procedures. It is
essential that correct shut down and storage procedures are followed to ensure continued purity of the product
water. UV treatment of the product water may be beneficial.
