4
– MOUNTING AND INSTALLATION
COD.
60M12/24.D.2018
EN
THE PRESENT MANUAL BELONGS TO -
Schenker Italia
- ALL RIGHTS RESERVED
25
4.4 Hydraulic connections
HYDRAULIC CONNECTION AND HOSES
FIG. 4-1
Pressurized fresh water valve
Pump
Elecrovalve
Non return valve
5 micron filter
Mesh filter
Swan neck upward - Discharge
Water inlet
Watermaker
Active carbon filter
Fresh water outlet
All the hydraulic connections (to exception of the fresh water production) have to be realized with a 16 mm.
int. diam. hose and a ½” holder. The hydraulic section that is continuously under consistent pressure is the
pump outlet
– 5 m. filter – watermaker inlet connections . For this section is necessary to use a good quality
PN 10 min.
reinforced hose. An inadequate hose could burst, jeopardizing seriously the safety of the vessel.
Plumb
to
pressure
side
of
vessel fresh
water
system
Exhausted
discharge
“Armovin”
type hose
int. dia. 16
mm.
Reinforced hose
PN10 min int. dia.
16 mm.
