Schambeck SFD GmbH
Refractive Index Detector RI2012
RI2012 V1.0 06-2013.EN / 28.10.2013
6
http://www.schambeck-sfd.com
Solvents should be degassed before use with a refractive index detector.
After use of salt containing solvents (such as buffers) the detector should be purged
with distilled water.
Make sure that the 6 bar (0.6 MPa) pressure limit of the flow cell is not exceeded.
Make sure that the 2 bar (0.2 MPa) pressure limit of the valve is not exceeded.
During operation the housing of the detector should be closed.
Do not use the detector in ambience of aggressive gases, very high humidity, strong
vibrations and strong changes in the ambience’s temperature.
