Unpacking the scanner
The scanner must be carefully unpacked and readied for use as explained
in the
ScanMate F6 / ScanMate F8 Plus Installation and Repacking Instructions
.
CAUTION:
The shipping container and other packing materials must be
saved for possible future use. Please note that if the scanner at any future
time needs to be shipped, it must be properly secured and packed as
described in the instructions. Otherwise, the warranty will be invalidated.
Cable connections
MAINS CONNECTION
WARNING:
The ScanMate F6 and ScanMate F8 Plus are Class I electrical
equipment. They must be connected to a single-phase mains outlet with a
protective ground (earth). For your personal safety and to avoid damage to
the scanner, never connect the scanner to the mains without a protective
ground.
The ScanMate F6 and ScanMate F8 Plus adjust automatically to the local
voltage.
SCSI CONNECTION: GENERAL RULES
The scanner must be connected to the computer with a SCSI cable.
• If no other SCSI units, such as extra hard disks, scanners etc., are connected,
follow the procedure for “Single-Unit SCSI Connection.”
• If other units are connected via the computer’s SCSI port, follow the in-
structions for “Multiple-Unit SCSI Connection.”
CAUTION:
• Before connecting or disconnecting cables, turn off the power for all units in-
volved. Otherwise damage may be caused to the scanner or other SCSI units.
• When starting up, always turn on the SCSI units (including the scanner)
first
and the computer
last
.
Installation
2•2
ScanMate F6 / ScanMate F8 Plus • Operator’s Manual
Summary of Contents for ScanmateF6
