ScanMate F6 / ScanMate F8 Plus • Operator’s Manual
© March, 1998 ScanView. All rights reserved.
No part of this publication may be copied or in any other way
reproduced, nor may it be stored in a retrieval system, without
the prior written permission of ScanView A/S.
The information in this manual is subject to change without
notice. ScanView A/S assumes no responsibility or liability for
any errors or inaccuracies that may appear in this book.
ScanMate F6, ScanMate F8 Plus, LightView, EasyMount,
ColorTrio, ColorQuartet and ColorQuartet MouseFree are
trademarks of ScanView A/S.
Other manufacturers’ trademarks are used in an editorial
fashion with no intention of infringement.
Head office
U.S. Subsidiary
ScanView A/S
ScanView, Inc.
Meterbuen 6
1875 South Grant St., Suite 750
DK-2740 Skovlunde
San Mateo, CA 94402
Denmark
U.S.A.
Tel: (+45) 44 53 61 00
Tel: (+1) 650-378-6360
Fax: (+45) 44 53 61 08
Fax: (+1) 650-378-6368
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment.
This equipment is supplied with a shielded cable. It must
be operated with a shielded cable in order to meet FCC Class A
emission limits.
This equipment generates and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own
expense.
Manual edition: 4
PN 730-00-036-04
Software versions:
ColorTrio for Macintosh:
V 2.0
ColorTrio for PC:
V 2.0
Summary of Contents for ScanmateF6
