SCANVIEW ScanmateF6, Operator'S Manual

Page: 26 / 38

Handling originals and mounting plates
4•8
ScanMate F6 / ScanMate F8 Plus • Operator’s Manual
The built-in LightView™ light table (ScanMate F8 Plus )
The ScanMate F8 Plus has a built-in LightView™ light table that lets you
view originals while you are working with the preview scan, without losing
registration.
• To view a transmission original, simply lift the lid of the scanner. The
viewing light goes on automatically.
• To view a reflection original mounted on the top plate of the mounting
plate, lift the scanner lid and tip the top plate up.
• If necessary, the scanner tray can be manually moved from left to right by
pressing on either end of the scanner’s front panel.
The optional EasyMount™ mounting table
The external EasyMount™ mounting table is available from your ScanView
dealer as an accessory. It is intended to be placed on an external light table,
and provides a frame into which the mounting plate can be placed.
When the top plate of the mounting plate is opened up, the base plate and
top plate can be mounted flat on the EasyMount. The EasyMount has coordi-
nates and an indication of the available scan resolutions for various parts of
the scanner bed. These can be seen through the mounting plate and can be
used as reference points for mounting originals.
ON
READY
BUSY
ERROR
Press here to move the
scanner tray to the left
Press here to move the
scanner tray to the right
The EasyMount™ external mounting
table is a handy mounting aid available
from your ScanView dealer.