SCANVIEW ScanmateF6, Operator'S Manual

Page: 33 / 38

Computer refuses to start
Check that the SCSI terminator is placed correctly. If it is not, proceed as
follows:
1 • Turn off the computer.
2 • Turn off the scanner and any other SCSI units.
3 • If the ScanMate F6 or ScanMate F8 Plus is the only SCSI unit, insert the
terminator in the free socket of the scanner.
If there is a chain of SCSI units, terminate the last unit of the chain.
4 • Turn on the scanner and any other SCSI units.
5 • Turn on the computer.
If the terminator is placed correctly, check the SCSI address switch on the
scanner, and check that all the attached SCSI units have been given different
addresses. If not, proceed as follows:
1 • Turn off the computer.
2 • Turn off the scanner and any other SCSI units.
3 • Check the manuals of the various units to find out how to set the SCSI
addresses.
The procedure for the ScanMate F6 and ScanMate F8 Plus
is described in this manual under “Cable connections:
Multiple-unit SCSI connection.”
4 • When all the addresses have been set as desired, turn on the scanner
and any other SCSI units.
5 • Turn on the computer.
TROUBLESHOOTING
ScanMate F6 / ScanMate F8 Plus • Operator’s Manual
6•1