Package contents:
Handheld Wand Scanner
Calibration Sheet
USB Power Adapter
USB Cable
Cleaning Cloth
microSD card
Storage pouch
Quick Start Guide
User Guide
PageManager Software
(on microSD card)
3
Turn scanner on
Press and hold the
Scan
button for 2 seconds.
Wait until both green and red LEDs turn off.
4
Calibrate the scanner
a. Lay the calibration sheet on a flat surface, printed side up.
b. Place the scanner on the white area of the calibration sheet.
c. Press and hold both the
Scan
and
PDF JPG
buttons for 3
seconds to turn on and enter the calibration mode.
d. When
C01
appears on the LCD
and the
red
LED flashes, slide the
scanner down across the white area of the calibration sheet.
e. When the first scan is finished,
C02
appears on the LCD.
f. Slide the scanner back up over the white area.
g. When the calibration is complete, 777/888 appears on the LCD,
and then the scanner automatically turns off.
h. Carefully place the calibration sheet back into the plastic sleeve and store until next use.
2
Handheld Wand Scanner
PANSCN08
Customer Support: http://www.pandigital.net/support
1
Insert and Charge the battery
Before the first time use, make sure the battery
is installed as shown.
Charge the battery until the
red
LED turns
green
.
Quick Start Guide
Connect to computer
or
Connect to USB Power Adapter
Insert microSD card
Insert an unlocked (writable) microSD card into
the memory card slot.
Continued
