48
Processing documents
t
To connect two or more zones:
1. Click the Modify Zones tool in the Tools palette.
2. Position the mouse pointer in one of the zones you want to
connect.
3. Hold the mouse button down and drag the mouse pointer onto
the zone(s) you want to connect. Enclose the whole area you want
included in the new connected zone.
4. Release the mouse button when you are done.
The zone borders change to display the new connected zone.
t
To divide a zone:
1. Click the Modify Zones tool in the Tools palette.
2. Position the mouse pointer at the point where you want to divide
the zone.
3. Hold down the Command key (
z
) and the mouse button while
dragging the mouse pointer over the area where you want the
separation to occur.
4. Release the mouse button when you have completely cut through
the zone. The original zone is replaced by two zones.
t
To delete zones:
1. Click the Draw/Select Zones tool in the Tools palette if it is not
already selected.
Two zones to be connected
A
B
Connecting zone
Resulting
connected
zone
A
B
Splitting zone
Resulting
zones
Zone to be split into two
Summary of Contents for OMNIPAGE PRO X
Page 1: ......
