92
Customizing OCR
t
To apply styles to existing zones:
Make Image view active. The
Zone Info
palette appears.
Check that the style set for the page is suitable. Change it if
desired.
Click the Draw/Select Zones tool in the Tools palette if it is not
already selected.
Select the zone you want to specify by clicking it.
• Shift-click to select additional zones.
• Double-click the Draw/Select Zones tool or choose Select All
in the Edit menu to select all zones on the current page.
Select the desired zone style in the
Zone Style
pop-up menu.
Select other zone properties as desired. Selecting zone type and
zone contents were described on page 41.
Note
Shortcut for applying zone styles
Hold the mouse button down while the mouse pointer is over a zone. A menu of
all the zone styles in the current style set is displayed. Select the style you want to
use for that zone. If the style set for the page only contains one style, no menu will
appear.
t
To apply styles to new zones:
There are two ways of doing this. Decide which you prefer:
• Draw a zone. It will inherit the zone style and other properties
of the last selected zone. If more than one zone is selected, the
zone style is taken from the first zone in the selection.
• Make sure no zones are selected. Select the desired zone style
and other properties in the Zone Info palette. Draw the zone.
t
To edit zone styles in a style set:
The basic style sets allow very little editing. You will normally edit the
built-in sample style sets or ones you have created yourself.
Choose
Style Sets...
in the Edit menu.
Double-click the style set you want to edit, or click Edit.
Summary of Contents for OMNIPAGE PRO X
Page 1: ......