Savant IP Audio Deployment Guide
Copyright © 2017 Savant System, LLC
009-1551-00 | 171121
10 of 34
3.4.
PAV-AIM7C
Front Panel
Power LED
Green
: System has power and is operating
normally.
Off
: System is not receiving power.
Status LED
Off
: Embedded processor is resetting, or is powered up, and is booting the embedded firmware.
Green
: Host has established communications with the embedded system.
Green Blinking
: Embedded system is ready, but no communication has been established with the host.
Red
: Host has determined the firmware needs to be updated, but a problem occurred during the process that will initiate a reset.
Red Blinking
: Embedded firmware is running, but has not received a DHCP IP Address.
Amber
: Host is updating the embedded firmware.
Amber Blinking
: Embedded system has a valid link-local IP Address and is connecting to the host.
Rear Panel
Reset
Resets the network settings of the device. Hold Reset Button for 5
seconds while powered on to clear network settings. Status LED will
rapidly blink red when reset is complete.
RS-232
8-pin RJ-45 port used to transmit and receive serial binary data to and
from serial controllable devices.
CTS/RTS handshaking availability based on
component profile. See RS-232 Connections section for pin-outs.
IR
(6) IR Ports
Uses 6-pin Control Connectors to send IR signals to control devices with an IR input or IR receiver via an IR flasher (5V tolerant
only). See IR Wiring section for important precautions regarding IR functionality before making any connections.
Digital Audio In
(Optical)
(2) Digital optical audio inputs.
Supports up to 96kHz/24-bit digital audio in; PCM stereo format only.
Digital Audio In
(Coaxial)
(2) Digital coaxial audio inputs.
Supports up to 96kHz/24-bit digital audio in; PCM stereo format only.
Analog Inputs
(3) Analog stereo inputs, RCA line-level inputs; 22 k
Ω
input impedance
Ethernet
8-pin RJ-45 port
10/100/1000 Base-T auto-negotiating port with Link/Activity LEDs.
Supports Audio Video Bridging (AVB).
Ethernet
Activity LED
Green Blinking
: Activity (Rx/Tx).
Off
: No Activity.
Ethernet Link LED
Green Solid
: Ethernet Link is established.
Off
: Ethernet link is not established.
Power Input
5V DC 3A
