Version 1.0
[
69
]
SAV 244 .70 / .71 / .72 / .73 /
.74 / .76 / .99
EN
9 REMOVAL AND DISPOSAL
9 REMOVAL AND DISPOSAL
The safety information from section 2 “Sicherheit” must be observed.
DANGER!
Risk of crushing!
There is a risk of limbs being crushed by the magnetic circular chucks
tipping over or falling during removal.
■
Persons may only be present outside of the hazard area. Do not stand
under suspended loads!
■
Secure the magnetic circular chucks and system parts against falling or
tipping over.
Only use sufficiently large load attachment devices for transport.
■
When lifting the magnetic circular chucks, only use suitable and
approved lifting gear which is designed for the weight of the chucks.
■
Use the lifting threads on the larger pole plates.
■
Do not use any magnetic lifting devices!
DANGER!
Risk of electric shock!
An electric shock can result in death or serious injuries.
■
Always carry out removal while the power supply is disconnected.
■
If the magnet has a connector, only unplug this once the demagnetising
cycles has been completed and the red signal light is permanently on.
Risk from electric arc.
The components of machines and systems are recyclable materials.
They must be reintroduced into the recycling process as per the WEEE Directive 2012/19/EU.
■
Dispose of the electro permanent magnetic circular chucks in line with the applicable country-
specific regulations.
Summary of Contents for 244.70
Page 71: ......
