Sav 244.70, Operating Instructions Manual

Page: 41 / 72

Version 1.0
[
41
]
SAV 244 .70 / .71 / .72 / .73 /
.74 / .76 / .99
EN
1 INTRODUCTION
1.3 Warranty conditions, guarantee and liability
We offer a one-year warranty for our device from the date of invoice. This warranty is limited to replacing parts
on which a defect was found.
The warranty obligation for all SAV products is limited to deliveries within the Federal Republic of Germany. For
deliveries outside of the Federal Republic of Germany, the additional costs arising from work carried out abroad
will be charged.
The warranty excludes:
■
Defects which are caused by connection to voltage sources which do not comply with the information on the
type plate
■
All types of wear which are the result of inexpert use without observing the information in the operating
instructions.
■
Damage to fuses, indicator lights and relays
■
Machine downtime cannot be charged for.
The manufacturer's General Terms and Conditions for warranty and liability apply. The T&Cs are available for
download from our homepage.
The manufacturer excludes warranty and liability claims for injury and damage which are caused by one or
several of the following:
■
Use of the permanent magnetic circular chucks contravening the intended use
■
Failure to observe the information, instructions and prohibitions in the operating instructions
■
Unauthorised structural changes to the electro permanent magnetic circular chucks
■
Insufficient monitoring of wear parts
■
Maintenance and service work not carried out incorrectly or late
To speed up execution of warranty and repair work, please always state the SAV classification number, the
SAV order number and the magnet number in all correspondence.
1.4 Copyright
These operating instructions are protected by copyright. All rights reserved. These operating instructions,
whether whole or in parts, may only be copied with authorisation from SAV GmbH. Violations will result in
liability for damages and can result in criminal prosecution.
1.5 Delivery and scope of delivery
Upon delivery, check whether the magnetic circular chuck was delivered completely and is undamaged.
Please contact us if any defects are found.
The scope of delivery includes:
■
Magnetic circular chuck
■
Operating instructions for the magnetic circular chuck (available for download from our homepage)
■
Operating instructions for the polarity reversal control unit (if included; available for download from our
homepage)
■
Operating instructions for the slip ring assembly and carbon brush holder (if included; available for download
from our homepage)