SAUTER flexotron®400 - RDT410
Introduction to flexotron®400
P100012103
5
2
Introduction to flexotron®400
2.1 flexotron®400 controllers
The controller flexotron®400 is a range of pre-programmed, configurable
controllers that can be set to handle everything from temperature control or
humidity control to CO
2
control or pressure control.
RDT405 and RDT 410
The flexotron®400 series comprises two different types, RDT405 and RDT410.
The RDT405 has 5 inputs/outputs and can be configured to control Temperature,
CO
2
, Humidity or Pressure. There is a new analogue input for connection of an
external Ni1000 setpoint device for control mode 1 (Temperature control).
The RDT410 has 10 inputs/outputs and can be configured to control
Temperature (ventilation control with heating and cooling), Water-heated radiator
heating with outdoor temperature dependent control-curve or Domestic hot-water
control. There is a new analogue input for connection of an external Ni1000
setp
oint device for control modes 1…4. The RDT410 is available in two versions,
RDT410F201 with 24 V AC supply voltage and RDT410F201 with 230 V AC
supply voltage.
Mounting
The controllers flexotron®400 are designed primarily for DIN-rail mounting but
can also be screw-mounted to any suitable surface.
flexotron®400 - RDT410
The RDT410 is a pre-programmed, configurable controller. All configuration and
normal handling is done using the display and the knob on the front.
