SAUTER flexotron®400 - RDT410
Display and encoder
P100012103
22
acknowledged. There is one menu display for each alarm with symbols showing
which type of alarm it is. See chapter 8 Alarm handling.
Calculated setpoint
For control modes with outdoor temperature compensation or cascade control,
the controller does not work towards a fixed setpoint value. Instead, it works
towards a calculated setpoint, which varies with the outdoor temperature or,
when using cascade control, the room temperature. The calculated setpoint is
displayed by turning the knob clockwise when in the Base Display.
Control mode 2
Control mode 3
Control mode 4
Supply air temp control
Cascade connected
Radiator circuit control
with outdoor compensation
room control with
outdoor curve
6.2 The 3 second level
This level is reached from the Base display by clicking and holding the encoder
button for 3 seconds. The 3-second level holds all menus for setting the clock
and the scheduler program. See chapter 9 Clock and Scheduler.
6.3 The 10-second level
This level is reached from the Base display by clicking and holding the encoder
button for 10 seconds.
The 10-second level holds all the configuration menus. See chapter 10
Configuration.
6.4 Display symbols
Configuration level
Menu number
BargraphAO1 output level
BargraphAO2 output level
AO2 Graphic output signal
Control mode 1 only
AO1 Graphic output signal
Control mode 1 only
Active 0...10V
input signal
Temperature control
Cascade control
Radiator circuit control
Domestic hot water control
Fan run indicator
Alarm indicator
Outdoor compensation
configured
Menu holds
changable values
or 3-position output
indicator
