SATELLINE-3AS and SATELLINE-3ASd
52
99
CHECK LIST
CHECK LIST
When installing and configuring a radio data modem following points should be considered :
1. Before connecting the RS line interface to equipment always check that the operating voltage
is switched off.
2. Consider the exact location of the equipment for optimum results
* Place the antenna in a free space as far as possible from any source of interference
* Do not place the modem on a strongly vibrating surface
* Do not place the modem in direct sun light or high humidity
3. The capacity and stability of the power supply must be secured so that the current required by
the transmitter is sufficient for creating a reliable connection.
4. The antenna is installed according to given instructions.
5. The settings of the radio modem correspond those of the terminal.
6. All radio modems of the system have the same settings and are compatible to each other
(e.g.channel frequency and width).
10
10
SOFTWARE UPDATE
SOFTWARE UPDATE
It is possible to update the software in the 3AS. Contact your local dealer for a software update.
