SATELLINE-3AS and SATELLINE-3ASd
38
6.3
6.3
Changing the settings using SL-commands
Changing the settings using SL-commands
All the settings can be changed with SL-commands. This makes it possible to control the modem
with an intelligent data terminal equipment (DTE,e.g. a PC or a PLC) with an appropriate
software. This makes it possible to use complex protocols in multi master and multi slave systems.
To use the SL-commands they must first be turned on in the SETUP mode.
6.3.1
Frequency
Channel commands Target description
SLHxx
Write ram
Freq =CenterFreq - xx*ChanSpace, where
xx=[00...99]
SLLxx
Write ram
Freq =CenterFreq - xx*ChanSpace, where
xx=[00...99]
SL&N?<CR>
Show ram
(Freq-CenterFreq)/ChanSpace
SL&+=nn<CR>
Write ram
Freq =Cent nn*ChanSpace, where
nn=[0...MaxNumberOfChannels/2]
SL&+>nn<CR>
Write
eeprom
Freq =Cent nn*ChanSpace, where
nn=[0...MaxNumberOfChannels/2]
SL&-=nn<CR>
Write ram
Freq =CenterFreq - nn*ChanSpace, where
nn=[0...MaxNumberOfChannels/2]
SL&->nn<CR>
Write
eeprom
Freq =CenterFreq - nn*ChanSpace, where
nn=[0...MaxNumberOfChannels/2]
SL&F?<CR>
Show ram
Frequency (Response is 'nnn.nnnn MHz')
SL&F=nnn.nnnn<CR
>
Write ram
Freq =nnn.nnnn MHz
SL&F=nnn.nnnn<CR
>
Write
eeprom
Freq =nnn.nnnn MHz
SL&C?<CR>
Show ram
CenterFrequency (Response is 'nnn.nnnn MHz')
Modem responds to all write commands with OK/ERROR
