Satel AMD-100, Manual

Page: 5 / 12

SATEL AXD-200 3
ATD-200
Temperature detector

Detects exceeding of the predefined temperature threshold.

Two programmable temperature thresholds.

Occupies 2 positions on the device list (optionally 1 – you can program just one
temperature threshold).

In the ABAX system, the detector is identified as ATD-100.
AFD-200
Water flood detector

Detects flooding in spaces provided with water installation.

Occupies 1 position on the device list.

In the ABAX system, the detector is identified as AFD-100.
The water flood detector requires you to purchase the FPX-1 probe, offered by
SATEL.
2 Description
Radio communication
The detector connects to the controller / control panel at regular time intervals to provide
information about its state (periodical communication). Additional communication may take
place as a result of alarm (see “Operating modes”).
Alarms
Described below are circumstances in which the detector reports alarm, depending on the
detector type. Irrespective of the detector type, tamper alarm is reported on opening the
tamper contact.
AMD-200 / AMD-201
The detector will report alarm:

after moving the magnet away from the detector (opening the window or door),

after opening the NC type input.
AMD-202
The detector will report alarm:

after moving the magnet away from the detector (opening the window or door),

after opening the NC type input,

after registering the specified number of pulses within a defined time period by the roller
shutter input,

after opening the roller shutter input (tamper alarm).
AVD-200
The detector will report alarm:

after detecting a shock caused by impact,

after moving the magnet away from the detector (opening the window or door).