10 AXD-200
SATEL
3. Knock once on the detector enclosure to select next type as shown in Table 2. The next
type after the water flood detector (7 flashes) is the magnetic contact (1 flash).
4. Wait until the LED flashes once and then indicates the type that has been selected. You
can only select next type when the LED stops flashing.
5. Repeat the steps 3 and 4 until you select the appropriate type of detector.
6. Wait about 10 seconds. After that time the LED will inform you what type has been saved
to the detector memory.
Do not close the detector enclosure before saving the type to the detector memory.
Otherwise, it can be interpreted by the detector as another knock on the enclosure,
which will change the type selected.
4 Specifications
Operating frequency band................................................................... 868.0 MHz ÷ 868.6 MHz
Radio communication range (in open area)
ABAX 2
ACU-220 ..............................................................................................up to 2000 m
ACU-280 ..............................................................................................up to 1200 m
ABAX..............................................................................................................up to 500 m
Battery.................................................................................................................... CR123A 3 V
Battery life expectancy .......................................................................................... up to 2 years
NC type input sensitivity................................................................................................. 240 ms
Temperature measurement range .......................................................................-10°C...+55°C
Temperature measurement accuracy ................................................................................±1°C
Standby current consumption .......................................................................................... 20 µA
Maximum current consumption ......................................................................................... 7 mA
Complied with standards.......
EN 50130-4, EN 50130-5, EN 50131-1, EN 50131-2-6, EN 50131-5-3
Security grade according to EN50131-2-6 .................................................................... Grade 2
Environmental class according to EN50130-5 .........................................................................II
Operating temperature range...............................................................................-10°C...+55°C
Maximum humidity ..........................................................................................................93±3%
Enclosure dimensions ................................................................................... 20 x 102 x 23 mm
Surface mounted magnet enclosure dimensions .............................................. 15 x 52 x 6 mm
Surface mounted magnet spacer dimensions ................................................... 15 x 52 x 6 mm
Flush mounted magnet enclosure dimensions...................................................... ø10 x 28 mm
Weight.................................................................................................................................59 g
Magnetic contact
Gap (max.):
surface magnet .............................................................................................. 20 mm
flush magnet................................................................................................... 18 mm
Shock detector
Detection range (depending on the surface type) ....................................................... up to 3 m
The specified detection range should be considered approximate. The actual range
should be determined experimentally after securing the detector to the surface.
Summary of Contents for AMD-100
Page 10: ...8 AXD 200 SATEL...
