SAS/op/proc/forks/op manuals/Ex/EXTREME MANUAL
v13
.pub 2/24/2019
Page 56
© 2014-2019 S.A.S. of Luxemburg, LLC.
OPTIONAL ELECTRONICS PARTS GUIDE (PAGE 56)
SAS™ EXTREME™ AUTO PROCESSOR
DESCRIPTION
PART NUMBER
[
A&B] CONTROL MODULE W/LOCAL TEST & 2’ PWR WIRE
HC-MOD-S-21478
B.1 RELAY 24 VOLT (BLACK)
(3 REQ.)
HC-BRL-H-4RD933332
B.2 15 AMP FUSE (TYPICAL AUTOMOTIVE STYLE FUSE) (1 REQ.)
HC-FUS-…-ATC15
[C] JOYSTICK & 10’ CABLE ASSEMBLY W/PLUG
HC-JYA-S-50270
( NOTE: This is the standard SAS™ Joystick)
[D] 30’ FORWARD CONTROL CABLE W/FLAT 4 WIRE PLUG
HC-CAB-S-50266-1
[E] 7’ JUMPER CABLE W/PLUGS (EXCAVATOR STICK TO [F])
HC-CAB-S-50274
[F] 32” VALVE BLOCK CABLE W/BULKHEAD AND COIL PLUGS
HC-CAB-S-50272
OPTIONAL TEST LIGHTS
1-LED CIRCUIT TESTER FOR WIRE [F] AT HYDRAULIC BLOCK
HC-PLG-I-TESTLIGHT-1
3-LED CIRCUIT TESTER FOR “Test Points” SHOWN BELOW
HC-PLG-I-TESTLIGHT-3
Joystick
Test Point
[C]
[D]
[E]
[F]
[A&B]
Power
Supply
Cable
15 Amp
Fuse Holder
Relay
Test Point
PLEASE NOTE:
The electrical components called out below are considered as optional components that could be supplied
by SAS™. Since the physical setup of the electrical controls for the Extreme™ will vary from machine to
machine, please consult the Sales team at SAS™ in order to determine which components (if any) will need
to be ordered for your particular unit.
Test point
for using
3-LED
CIRCUIT
TESTER
Use tester
between:
[D] & [E]
OR
[E] & [F]
For testing
cables:
[D] & [E]
S.A.S. of Luxemburg, LLC. 133 Center Drive Hwy 54, PO Box 260, Luxemburg, WI 54217 USA
Phone: 920-845-2307
1-877-SAS-FORK
Fax: 920-845-2309
Web: www.sasforks.com
